3. INSPECTION/ADJUSTMENT PEOPLE 125/150 necessary and in accordance with the Maintenance Schedule. Compression Gauge Oil Check Bolt FINAL REDUCTION GEAR OIL OIL LEVEL CHECK Place the motorcycle on its main stand on level ground for oil level check. Stop the engine and remove the oil check bolt. The oil level shall be at the oil check bolt hole. If the oil level is low, add the recommended oil to the proper level. Recommended Oil: GEAR OIL VISCOSITY SAE90# Oil Check Bolt Hole Install the oil check bolt. Make sure that the sealing washer is in good condition. OIL CHANGE Remove the oil check bolt. Remove the oil drain bolt and drain the oil thoroughly. Install the oil drain bolt. Torque: 1.0kg-m Make sure that the sealing washer is in good condition. Oil Drain Bolt Sealing Washer Fill with the recommended oil. Oil Capacity: At disassembly : 210cc At change : 180cc Reinstall the oil check bolt and check for oil leaks. Torque: 1.2kg-m DRIVE BELT Remove the left crankcase cover. ( 9-3) Inspect the drive belt for cracks or excessive wear. Replace the drive belt with a new one if 3-7