5. ENGINE REMOVAL/INSTALLATION DINK 50/125 INSTALLATION Installation is in the reverse order of removal. Tighten the engine mounting bolt/nut to the specified torque. Torque: 5 kgf-m (50 N-m, 36 lbf-ft) Tighten the right and left rear shock absorber lower mount bolts to the specified torque. Torque: 2.7 kgf-m (27 N-m, 19 lbf-ft) Install the rear brake caliper and tighten the mount bolts to the specified torque. Torque: 3.2 kgf-m (32 N-m, 23 lbf-ft) Do not lose the O-rings (1) and (2)on the thermostat and intake manifold. After installation, inspect and adjust the following: · Throttle grip free play · Fill the cooling system with coolant and start the engine to bleed air from the system. 5-6