5. ENGINE REMOVAL/INSTALLATION DINK 50/125 ENGINE HANGER REMOVAL Remove the engine mount nut (1). Pull the engine mount bolt (2) out. Be careful to put the engine down. Remove the left engine hanger mount bolt (3). Remove the right engine hanger mount bolt and collar (4). Remove the engine from frame. INSTALLATION Installation is in the reverse order of removal. Tighten the engine hanger mount bolts to the specified torque. Torque: 5 kgf-m (50 N-m, 36 lbf-ft) Tighten the engine mount bolt/nut to the specified torque. Torque: 5 kgf-m (50 N-m, 36 lbf-ft) INSPECTION Inspect the engine hanger bushings (1) and stopper rubber (2) for wear or damage. 5-8