18. STARTING SYSTEM DINK50/125
SERVICE INFORMATION
GENERAL INSTRUCTIONS
· The removal of starter motor can be accomplished with the engine installed.
· For the starter clutch removal, refer to the chapter 10.
· After the starter clutch is installed, be sure to add the engine oil and coolant and then bleed air
from the cooling system.
SPECIFICATIONS
Item Standard (mm) Service Limit (mm)
Starter motor brush length 12.5mm 8.5mm
TORQUE VALUES
Starter motor mounting bolt 1 kgf-m (10 N-m, 7 lbf-ft)
TROUBLESHOOTING
Starter motor won`t turn Lack of power
· Fuse burned out · Weak battery
· Weak battery · Loose wire or connection
· Faulty ignition switch · Foreign matter stuck in starter motor
· Faulty starter clutch or gear
· Faulty front or rear stop switch
· Faulty starter relay Starter motor rotates but engine does
· Poorly connected, broken or shorted wire not start
· Faulty starter motor · Faulty starter pinion
· Starter motor rotates reversely
· Weak battery
18-3
Pièce d'origine service de qualité et livraison rapide 
4.7 / 5