16. BATTERY/CHARGING SYSTEM DINK 50/125 BATTERY(DINK 125) REMOVAL/INSTALLATION The battery is in the battery box below seat. 1. Open the seat. 2. Remove the two screws and battery cover (1) (1). 3. Remove the four screws and then remove the battery retainer (2). (2) 4. Pull battery out to expose the terminal leads 5. Disconnect the negative (-) terminal lead (3) from the battery first, then disconnect the positive (+) terminal lead (4). 6. Remove the battery from the battery box. Battery installation: (4) (3) Install in the reverse order of the removal. When install the battery, first connect the positive (+) cable and then negative (-) cable to avoid short circuit. 16-6