1. GENERAL INFORMATION DINK50/125 If the fuse is burned out, find the cause and The connector shall be inserted repair it. Replace it with a new one completely. according to the specified capacity. If the double connector has a lock, lock it at the correct position. Confirm Check if there is any loose wire. Capacity Before connecting a terminal, check for After operation, terminal caps shall be damaged terminal cover or loose negative installed securely. terminal. When taking out the connector, the lock on Check the double connector cover for the connector shall be released before proper coverage and installation. operation. Insert the terminal completely. Check the terminal cover for proper coverage. Hold the connector body when connecting Do not make the terminal cover opening or disconnecting it. face up. Do not pull the connector wire. Secure wire harnesses to the frame with their respective wire bands at the Check if any connector terminal is bending, designated locations. protruding or loose. Tighten the bands so that only the insulated surfaces contact the wire harnesses. 1-5