15. REAR BRAKE/REAR FORK/REAR WHEEL/REAR SHOCK ABSORBER DINK50/125 Install new pads so that their ends rest on the pad retainer on the brake properly. Install the pad pin by pushing the pads against the pad spring to align the pad pin holes in the pads and caliper. Install the rear caliper onto the rear fork and then install and tighten the new two caliper mounting bolts to the specified torque. Torque: 32 N-m (3.2 kgf-m, 23 lbf-ft) Tighten the two pad pins to the specified torque. Torque: 18 N-m (1.8 kgf-m, 13 lbf-ft) 15-10