13. FUEL SYSTEM/CARBURETOR/ FUEL PUMP/ FUEL TANK DINK 50/125 FUEL TANK REMOVAL/INSTALLATION When removing the fuel tank, do not allow flames or sparks near the working area and drain the residual gasoline into a container. Remove the inner cover (refer to the "FRAME COVERS REMOVAL/INSTALLATION" section in the chapter 2). Disconnect the fill cap ground wire connector (1). Disconnect the fill cap lock cable (2). Disconnect the fuel hose (3). Disconnect the fuel unit connector (4). Remove the four nuts (5) and remove the bridge plate (6). 13-26