8. DRIVE AND DRIVEN PULLEYS/ KICK STARTER DINK 50/125 DRIVE BELT Remove the left crankcase cover. ( 9-3) INSPECTION Check the drive belt for cracks, separation or abnormal or excessive wear. Measure the drive belt width. Service Limit: 17mm replace if below Use specified genuine parts for replacement. REPLACEMENT Clutch Outer Clutch Outer Nut Remove the ten left crankcase cover bolts and left crankcase cover. ( 9-3) Hold the clutch outer with the universal holder and remove the 10mm clutch outer nut and clutch outer. Special Universal holder E017 Universal Holder Ratchet Drive Face Hold the drive pulley with the holder and remove the 12mm drive face nut. Remove the starting ratchet. Remove the drive pulley face. Drive Face Nut 8-26