19. LIGHTS/METERS/SWITCHES DINK 50/125 Remove the fuel unit (5). Be careful not to bend or damage the fuel unit float arm. INSPECTION Connect the fuel unit wire connectors and turn the ignition switch "ON". Before performing the following test, operate the turn signals to determine that the battery circuit is normal. Check the fuel meter for correct indication by moving the fuel unit float up and down. Float Position Display Upper Much (Full) Lower Less (Empty) Wire Terminals Display Free From Much to Less Apply From Less to Much The fuel meter is normal if it operates as above indicated. If not, check for poorly connected terminals or shorted wires. Measure the resistance between the Yellow/White and Blue/White terminals of the fuel unit connector. Standard (at 20°C/68°F): Float at full position 1100 33 Float at empty position 100 3 19-11