17. IGNITION SYSTEM DINK 50/125 Disconnect the ignition coil primary connectors (2). Remove the bolt (3) and the ignition coil (4). Installation is in the reverse order of removal. CDI REMOVAL/INSTALLATION Remove the luggage box (refer to the "FRAME COVERS REMOVAL/INSTALLATION" section in the chapter 2). Disconnect the CDI connectors (1) and remove the CDI (2). RESISTANCE INSPECTION Measure the resistance between the terminals. Due to the semiconductor in circuit, it is necessary to use a specified tester for accurate testing. Use of an improper tester in an improper range may give false readings. 17-6