14.HANDLEBAR/FRONT WHEEL/FRONTBRAKE/ FRONT SHOCK ABSORBER/STEERING STEM DINK 50/125 Remove the screw (6) and brake light switch. INSTALLATION Install the brake light switch and tighten the screw to the specified torque. Torque: 1 N·m (0.1 kgf·m, 0.7 lbf·ft) Align the pin on the master cylinder holder with the hole on the handlebar. Install the front master cylinder and holder with the "UP" mark facing up. Install the bolts and tighten the upper bolt first then tighten the lower bolt to the specified torque. Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft) 14-20