14.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/ FRONT SHOCK ABSORBER/STEERING STEM DINK 50/125 INSTALLATION Install the handlebar onto the steering stem and install the handlebar collar, lock nut and bolt. Tighten the bolt to the specified torque. Torque: 4.5 kgf-m (45 N-m, 32 lbf-ft) Connect the right and left handlebar switch connectors. Install the front and rear master cylinders and connect the brake light switch wires (refer to the "BRAKE MASTER CYLINDER" section in this chapter and chapter 15). Adjust the throttle grip free play to the specified range of 26 mm (0.080.24 in). 14-5