13. FUEL SYSTEM/CARBURETOR/ FUEL PUMP/ FUEL TANK DINK 50/125 AUTO BYSTARTER INSPECTION Measure the resistance between the auto by-starter wire terminals. Resistance: 10 (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto by-starter with a new one. Connect a hose to the fuel enriching circuit of the carburetor. Connect the auto by-starter green/black wire to the positive (+) terminal of a battery and black/white wire to the negative (-) terminal. Wait 5 minutes and blow the hose with mouth. If the passage is blocked, the auto by-starter is normal. Disconnect the auto by-starter from the battery. Wait 30 minutes and blow the hose with mouth. If air can be blown into the hose, the auto by-starter is normal. By-starter Cap By-starter Screw AUTO BYSTARTER REMOVAL Remove the by-starter cap. Remove the one set plate screw and set plate and then remove the auto by-starter from the carburetor body. Set Plate 13-34