7. CYLINDER/PISTON DINK 50/125
Intake Side Guide
nspect the exhaust side and intake side chain
guides.
Wear/Damage Replace.
Exhaust Side Guide
PISTON INSTALLATION
Remove any gasket material from the
crankcase surface. "IN" Mark
Be careful not to drop foreign matters
into the crankcase.
Install the piston, piston pin and a new piston
pin clip.
· Position the piston "IN" mark on the
intake valve side.
· Place a clean shop towel in the
crankcase to keep the piston pin clip
from falling into the crankcase.
CYLINDER INSTALLATION
Install the dowel pins and a new cylinder
gasket on the crankcase.
Coat the cylinder bore, piston and piston
rings with clean engine oil.
Carefully lower the cylinder over the piston
by compressing the piston rings.
· Apply proper clean engine oil around
cylinder wall.
· Be careful not to damage or break the
piston rings.
· Stagger the ring end gaps at 120° to the
piston pin.
7-17
Pièce d'origine service de qualité et livraison rapide 
4.7 / 5