people gt 125 i Manuel atelier : Page 177

          15. REAR BRAKE/REAR FORK/REAR
    WHEEL/REAR SHOCK ABSORBER                                             People GT 125i


15
 INSTALLATION
                                                    Fluid Tube Bolt
 Install the brake caliper to the rear fork and
 tighten the two bolts.
 Torque: 35 N-m
 Connect the brake fluid tube to the brake
 caliper and install fluid tube bolt, copper
 washers and tighten the fluid tube bolt.
 Fill the brake reservoir with the specified
 brake fluid and bleed air from the brake
 system. ( 14-10)
 When installing the brake fluid tube, be
     sure to install the two copper sealing
     washers.                                       Brake Caliper Bolts


 REAR FORK
 REMOVAL
 Remove the exhaust muffler. ( 2-10)
 Remove the rear brake caliper. ( 16-3)




 Remove the right rear shock absorber lower
 mount bolt.
 Remove the rear axle nut and remove the
 collar.
 Remove the rear fork.

                                                      Bolt

 The installation sequence is the reverse of
 removal.



 Turn the inner race of each bearing with your
 finger to see if they turn smoothly and quietly.
 Also check if the outer race fits tightly in the
 hub.
 Replace the bearings if the races do not turn
 smoothly, quietly, or if they fit loosely in the
 hub.



                                                                                 15-4