5. ENGINE REMOVAL/INSTALLATION People GT 125i Remove the engine mount nut Pull out the engine mount bolt. Remove the engine from the frame. At removing the engine, be careful not to catch your hand or finger between the engine hanger and crankcase. INSTALLATION Installation is in the reverse order of removal. Tighten the engine mounting bolt/nut to the specified torque. Torque: 5 kgf-m (50 N-m) Tighten the right and left rear shock absorber lower mount bolts to the specified torque. Torque: 4.0kgf-m (40N-m) Install the rear brake caliper and tighten the mount bolts to the specified torque. Torque: 3.2 kgf-m (32 N-m, 23 lbf-ft) After installation, inspect and adjust the following: · Throttle grip free play · Fill the cooling system with coolant and start the engine to bleed air from the system. API/ABV Reset(Refer to chapter14) 5-5