people gt 125 i Manuel atelier : Page 176

           15. REAR BRAKE/REAR FORK/REAR
     WHEEL/REAR SHOCK ABSORBER                                               People GT 125i

                                                   Fluid Tube Bolt
   REAR BRAKE
   REAR BRAKE CALIPER REMOVAL
   First remove the exhaust muffler. ( 2-10)
   Remove the rear brake fluid tube bolt and
   disconnect the brake fluid tube.
   Remove two bolts attaching the rear brake
   caliper.
   Remove the rear brake caliper.
   When removing the brake fluid tube, use
       shop towels to cover plastic parts and
       coated surfaces to avoid damage.


                                                   Brake Caliper     Bolts
                                                                             Brake Disk
   INSPECTION
   Inspect the brake pads and brake disk.

   Measure the brake disk thickness.
   Service Limit: 4.0 mm replace if below




   Visually check the brake pad thickness and it
   should not exceed the wear indicator mark.
                                                             Dowel Pin




   DISASSEMBLY
   Remove two brake pads dowel pins and three
   bolts from the brake caliper.
   Remove the brake pads.
                                                          Brake Pads




15-3