people gt 125 i Manuel atelier : Page 133

          13. FUEL INJECTION SYSTEM                                                          People GT 125i


 SERVICE INFORMATION
 GENERAL INSTRUCTIONS
 Gasoline is very dangerous. When working with gasoline, keep sparks and flames away
   from the working area.
   Gasoline is extremely flammable and is explosive under certain conditions. Be sure to
   work in a well-ventilated area.
 · Disconnect the cables of the battery when the engine is running, which could lead to ECU
   damage.
 · Connect the harness positive (+) cable to the battery negative (-) terminal or connect the harness
   negative (-) to the battery positive (+) terminal, which could lead to ECU damage.
 · Always keep fuel over 750 cc in fuel tank.
 SPECIFICATIONS
                      Item                                           Standard
 Charging voltage of battery                    13.5~14.5V
 Voltage from the ECU to sensor                 50.1V
 Fuel injector resistance (20°C/68°F)           10.6~15.9


 Water temperature sensor resistance            2.07510 K (20~30°C)


 Throttle position sensor voltage               Idle (0°)=0.230.05V
                                                Throttle fully (90° /3.27V over)

 Fuel pump resistance (20°C/68°F)               F: about 1100 E: about 100
              O2 sensor heater resistance       6.7~9.5
 O2 sensor               Air/Fuel<14.7 (Rich) >0.7V
               Voltage
                         Air/Fuel>14.7 (Lean) <0.18V
 Crank position sensor (Pulser) resistance      95~144
 Inductive ignition coil resistance (20°C/68°F) 0.55~0.75
 Roll sensor voltage (diagnostics)              Normal: 0.3~1.4V
                                                Fall down ( >65° ): 3.5~4.7V
 Idle speed                                     1850100 rpm




13-3