12. COOLING SYSTEM COOLING SYSTEM TESTING RADIATOR CAP INSPECTION Radiator Tester Install the radiator cap onto the radiator tester and apply specified pressure to it. It must hold specified pressure for at least six seconds. Apply water to the sealing cap surface before testing. Radiator Cap Relief Pressure: Radiator Cap 0.90.15 kg/cm Install the radiator tester onto the radiator and apply specified pressure to it. It must Radiator Cap hold specified pressure for at least six seconds. Check the water hoses and connectors for leaks. The test pressure should not exceed 1.05 kg/cm. Excessive pressure can damage the radiator and its hose connectors. COOLANT REPLACEMENT The engine must be cool before serving the cooling system, or severe scalding may result. Open the radiator protector and remove the radiator cap. Place a drain pan under the water pump and drain the coolant from the system by removing the drain bolt. Drain Bolt 12-4