kxr 50 90 Manuel atelier : Page 63

          3. INSPECTION/ADJUSTMENT                                               Mongoose/KXR 90/50


 HEADLIGHT BEAM                                  Adjusting screw
 ADJUSTMENT (ON ROAD
 ONLY)
 Vertical adjustment:
 Turn the ignition switch ON and start the
 engine.
 Turn on the headlight switch.
 Adjust the headlight aim by turning the
 headlight aim adjusting screw.

                                                           Headlight

 BRAKE PEDAL ADJUSTMENT
 (KXR 90 ON ROAD ONLY)
 The brake pedal free play should be
 adjusted to 5~10 mm (0.2~0.4 in) at the
 brake pedal pivot. If the free play is
 incorrect, adjust as follows:




                                                Locknuts                 Brake Cam Lever
 Adjust:
 1. Keep front brake lever free play at 10~20
    mm (0.4~0.8 in).
 2. Loosen the locknuts. (R/L front lower
    brake cables)
 3. Turn the adjusting bolts until the front
    lower brake cables is tensed.
 4. Apply the front brake lever and check
    front brake cam lever to make sure that
    the brake does not drag after adjusting.
                                                Adjusting Bolts          R/L Front Lower Cable
                                                Cable Joint Case Cover       Cable Joint
 5. While remove the cable joint case cover
    and applying the brake pedal, make sure
    the left and right front lower cable
    lengths (A and B) are equal. The cable
    joint will become vertical.
 6. Tighten the locknuts. (R/L front lower
    brake cables)



                                                        Bolts




                                                                                           3-20