12. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM Mongoose/KXR 90/50
Bushes
Inspect the front arm.
Replace if cracks, bends or damage.
Do not attempt to straighten a bent arm,
this may dangerously weaken the arm.
Inspect bushes.
Replace if wear or damage.
Bushes
INSTALLATION
Reverse the "REMOVAL" procedures.
Apply the grease onto the bushes.
Install the front arm onto the frame and
tighten the bolts and nut.
Torque: 4.05.0kgf-m
Apply the grease onto the bushes.
Install the steering knuckle into the front
arm and tighten the bolt and nut.
Torque: 4.05.0kgf-m
Install the cotter pin and band ends of cotter
pin.
Always use a new cotter pin.
Install the tie-rod into the steering knuckle
and tighten the nut.
Torque: 2.03.0kgf-m
Install the cotter pin and band ends of cotter
pin.
Always use a new cotter pin.
12-12
4.7 / 5