12. FRONT WHEEL/FRONT BRAKE/FRONT SUSPENSION/STEERING SYSTEM Mongoose/KXR 90/50 STEERING SYSTEM HANDLEBAR REMOVAL Remove the following parts: Handlebar and Front fender. Refer to the "FRAME COVER" section in the CHAPTER 2 INSPECTION Inspect the handlebar. Replace if cracks, bends or damage. INSTALLATION Install handlebar and handlebar holder, then tighten the four bolts. Torque: 1.82.5kgf-m · Align the mark on the handlebar with the lower handlebar holder surface. · Be sure the upper handlebar holder mark face to front. · Fist tighten the bolts on the front side of the handlebar holder, and then Mark tighten the bolts on the rear side. Refer to the "BRAKE FREE PLAY" section in the CHAPTER 3 to adjust front brake. Brake cable free play: 1020mm 12-13