6. CYLINDER HEAD/VALVES STRYKER 125/150 Remove the four bolts attaching the engine front bracket and the bracket. Upper Hanger Remove the three engine upper hanger bolts and the hanger. Remove the two nuts attaching the engine rear bracket. Remove the two bolts attaching the engine lower fixer. Remove the two engine rear bracket bolts to tilt the engine forward. Remove the lower engine hanger bolt to remove the engine. Lock Nut Lower Fixer Front Bracket ENGINE INSTALLATION Install the engine in the reverse order of removal. Install the engine to its original position with a jack or other adjustable support. · When installing the engine, do not damage the bolt threads and route the wires and cables properly. · Install the gear shift pedal by aligning the punch mark on the pedal with that on the spindle. Torques: Engine upper bracket bolt: 3.54.5kg-m Engine hanger bolt: 3.54.5kg-m After installation, perform the following inspections and adjustments: · Throttle operation · Clutch lever free play adjustment · Drive chain adjustment 6-3