stryker 125 Manuel atelier : Page 115

          9. CLUTCH/GEAR SHIFT MECHANISM                                             STRYKER 125/150

                                                   Clutch Outer
  Install the clutch outer drive gear onto the
  crankshaft.
  Install the oil pump drive gear onto the
  crankshaft.
  Install oil pump driven gear and chain.




                                                                           Chain   Driven Gear
  Install the clutch outer and thrust washer.
 Install the thrust washer with the chamfered
    side facing up.

  Install the oil pump chain and driven gear
  and secure it with the 6mm nut.
  Install the clutch assembly.
  Stagger the clutch friction disks and clutch
  plates and then put them on the clutch center.
  Then install the clutch center together with
  the well-arranged friction disks and plates
  into the clutch outer.
                                                            Thrust Washer

  Install the circlip.
 Install the circlip with the chamfered
    side facing down.




                                                            20mm Circlip
                                                                  Bolts
  Install the tension springs and clutch lifter.
  Install the washers to the bolts and tighten
  the four bolts.
  Torque: 0.81.2kg-m
  Install the clutch lifter guide pin.




                                                           Guide Pin

                                                                                      9-8