9. CLUTCH/GEAR SHIFT MECHANISM STRYKER 125/150 Square Nut Install the oil filter rotor. Install the washer and tighten the square nut. Torque: 4.05.0kg-m Install the washer with the mark "OUTSIDE" facing up. Install the special flange gasket onto the balance shaft driven gear with the flange facing down and then loosely install the square nut (left hand threads). Tighten the square nut using the square socket. Oil Filter Rotor Oil Filter Rotor Cover Screws Install the oil filter rotor cover. Check the gasket for wear or damage and replace if necessary. Install and tighten the three oil filter rotor cover screws. Torque: 0.30.4kg-m Install the oil pump gear cover and tighten the two bolts. Bolts RIGHT CRANKCASE COVER INSTALLATION First install the dowel pins and then install the gasket. Install the right crankcase cover and tighten the cover bolts. Torque: 0.81.2kg-m Tighten the right crankcase cover bolts diagonally. Right Crankcase Cover Bolts 9-9