agility 125 Manuel atelier : Page 146

          13. REAR WHEEL/REAR BRAKE/
    REAR SUSPENSION                                               AGILITY 125

                                                  Rear Axle Nut
 REAR WHEEL
 REMOVAL
 Remove the exhaust muffler. ( 2-5)
 Remove the rear axle nut to remove the rear
 wheel.




 INSPECTION
 Measure the rear wheel rim runout.
 Service Limits:
      Radial: 2.0mm replace if over
      Axial: 2.0mm replace if over
 If the rim runout exceeds the specified
 service limits, check the final shaft bearing
 for excessive play and the final shaft for
 bending. Inspect the rear wheel and wheel
 rim for runout.


 Inspect the rear brake drum.
 Measure the rear brake drum I.D.
 Service Limits: 131mm replace if over




 INSTALLATION
 Install the rear wheel in the reverse order of
 removal.
 Tighten the rear axle nut.
 Torque: 11.0-13.0kg-m
 Install the exhaust muffler.
 Torque:
 Exhaust muffler joint lock nut: 1.0~1.4kgf-m
 Exhaust muffler lock bolt: 3.0~3.6kgf-m
 First install and tighten the exhaust
    muffler joint lock nuts and then the
    exhaust muffler lock bolts.
                                                                         13-2