agility 125 Manuel atelier : Page 130

          12. FRONT WHEEL/FRONT BRAKE/
    FRONT SUSPENSION                                                          AGILITY 125

                                                    Wear Indicator Plate          Brake Cam
 Install the return spring by aligning the spring
 hook end with the hole in the brake panel.
 Apply a small amount of engine oil to the felt
 seal and install it to the brake panel.
 Install the wear indicator plate on the brake
 cam by aligning the tooth on the plate with
 the groove on the brake cam.




                                                                            Return Spring
                                                           Bolt
 Install the brake arm on the brake cam by
 aligning the punch mark on the brake arm and
 the scribed line on the brake cam.
 Install and tighten the brake arm bolt.
 Torque:0.8~1.2kgf-m




                                                                            Brake Arm
                                                     Brake Shoe Springs
 Install the brake shoe springs to the brake
 shoes and then install the brake shoes into the
 brake panel.

 INSTALLATION
 Install the brake panel onto the front wheel.
 Install the front wheel. ( 12-7)
 Adjust the front brake lever free play.




                                                                       Brake Shoes




12-9