10.CRANKCASE/CRANKSHAFT/TRANS- MISSION SYSTEM/STARTER SPINDLE Pulsar CK 125 CRANKCASE REMOVAL Bolts The following parts must be removed before removing the crankcase: · Cylinder head (Refer to Section 6.) · Cylinder/piston (Refer to Section 7.) · Starter motor/generator/left crankcase cover/starter clutch/camshaft (Refer to Section 8.) · Clutch/gear shift mechanism (Refer to Section 9.) Remove the eleven crankcase attaching bolts. Bolts Bolts Separate the left and right crankcase halves. Never pry the crankcase apart with a driver to avoid damaging the mating surfaces. Slightly tap the crankcase to separate the crankcase halves using a plastic hammer. Gasket Transmission Fork Shaft Remove the gasket and dowel pins. Be careful not to lose the washer on the gear shift spindle. Dowel Pins TRANSMISSION SYSTEM REMOVAL Remove the transmission fork shaft and transmission forks. Transmission Fork 10-3