10.CRANKCASE/CRANKSHAFT/TRANS- MISSION SYSTEM/STARTER SPINDLE Pulsar CK 125 Remove the transmission drum. Transmission Drum INSPECTION TRANSMISSION FORK/DRUM Inspect each transmission fork for bending or damage. Measure each transmission fork claw thickness. Service Limit: 4.43mm replace if below Transmission Fork Measure each transmission fork shaft hole I.D. Service Limit: 12.058mm replace if over Check the transmission fork shaft for bending or damage. Measure the transmission fork shaft O.D. Service Limit: 11.936mm replace if below Inspect the transmission drum for scratches or poor lubrication. Check the transmission drum grooves for Right damage. Check the bearing for excessive free play. Measure the transmission drum O.D. Service Limits: Left end : 12.926mm replace if below Right end: 20.919mm replace if below Left Check the transmission drum and transmission fork shaft holes in the left and Washer right crankcase halves for wear or damage. 10-4