3. INSPECTION/ADJUSTMENT SUPER8 50 2T
Wash the air cleaner element in detergent
oil, squeeze out and allow to dry. Squeeze out
excess oil dry
Never use gasoline or organic vaporable
= oil with acid or alkali for washing.
After washing, soak the element in clean
engine oil SAE 10W-30# and squeeze out
excess oil. Reinstall the element. Soak in oil
Wash Squeeze
out and dry
Cylinder Compression
Warm up the engine before compression
test.
Remove the spark plug and insert a
compression gauge.
Open the throttle valve fully and push the
starter button for 78 seconds to test the
compression.
Compression:
11.8kg/cm
If the compression is low, check for the
following:
· Leaking cylinder head gasket
· Worn piston/cylinder
If the compression is high, it indicates that
carbon deposits have accumulated on the
combustion chamber and the piston head.
Clip
LUBRICATION SYSTEM
Oil Filter Cleaning
Disconnect the oil tube at the oil pump side
and allow oil to drain into a clean container.
Remove the tube clip at the oil tank side
and disconnect the oil tube.
Remove the oil filter.
Oil Filter
3-10
Clignotant bien emballé, bien protégé donc arrivé en bon état. fonctionne nickel ! 
Bonne prestation ! 
4.7 / 5