12. FRONT WHEEL/SUSPENSION/ STEERING STRYKER 125/150 Place shop towels under the bottom tube Socket Spanner and set it in a vise. Apply locking agent to the socket head bolt and then install it into the piston. Tighten the socket head bolt using the socket spanner. When tightening the socket head bolt, temporarily install the front fork spring and front fork tube. Torque: 1.52.5kg-m Apply engine oil to a new oil seal and install the oil seal using the fork seal driver. Then, install the snap ring and dust seal. Fully compress the front fork and fill SS8# engine oil into the front fork tube. Do not fill too much engine oil. Specified Oil Level: mm Specified Capacity: Compress 12-16