Mon Panier
| Désignation | Référence | Qté |
|---|
| Désignation | Référence | Qté |
|---|
10.FINAL REDUCTION/
TRANSMISSION SYSTEM MXU 250R/300R
Replace a new O-ring and apply engine oil to
the O-ring.
Install the secondary driven bevel gear into
the transmission case cover.
Align the mark on the secondary bevel
driven gear shaft case with the index
mark on the transmission case cover.
O-ring Marks
Bolts
Shift the shift shaft to neutral.
Install and tighten the four bolts in several
steps until the driven bevel gear shaft case
evenly touches the transmission case cover.
Then, while rotating the driven bevel gear
shaft, tighten the bolts in a crisscross pattern
in several steps.
It is important to turn the driven bevel
gear shaft while tightening the bolts. If
the bevel gear shim is too thick, the
Driven Bevel Gear Shaft Case
gears will lock after only light
tightening.
Speedometer Gear
Install the speedometer gear and washer.
Install the plug and tighten it.
Washer Plug
10-28
bonne réactivité. Les pièces sont arrivées comme prévu et bien emballées.
Pas de problèmes de conformité.
Bon vendeur, j'y retournerai.
Produit super mais panne incompréensible !
Ras 
4.7 / 5