mxu 400 Manuel atelier : Page 29

                                                               3. With two drops of red Loctite #271 on the threads
                                                        and with the splines of the clutch shaft protruding
                                                        through the movable drive face, install the nut and
                                                        tighten to 147 ft-lb.




                                             KC135




                                                                                                    KC152A
                                                                                                              2



                                             KC131
2. Install the bushing over the clutch shaft; then
   install the movable drive face assembly on the
   clutch shaft.
                                                                                                      KC141
                                                     4. Remove the cap screw from the fixed driven face;
                                                        then rotate the pulleys counterclockwise until the
                                                        driven pulley faces are together.
                                                     5. With the two alignment pins installed in the V-belt
                                                        housing and a new V-belt cover gasket in place,
                                                        install the V-belt cover. Using the pattern shown,
                                                        secure with the cap screws tightened to 8 ft-lb.




                                             KC128




                                                                                                    KC142A




                                             KC138




                                                                                                      2-19