12. FUEL SYSTEM LIKE 200i Rod ECU ECU MOUDLE REMOVAL To dismantle the throttle cable. To disconnect the coupler from ECU module. To release the bolts of clamp of intake manifold To remove the vacuum pipe. To remove the ECU module. First, push the stopper of coupler to Clamp of manifold Throttle cable Stopper release the rod, then pull back the rod to a lower fixed position after hearing click and then remove the coupler. Fixed screws To push the stopper and release the pulling rod. To ensure the rod back to the lowest fixed position, while you hearing a click, you have Pulling rod succeeded in removing the ECU module ECU module and coupler are extremely expensive components just like which used Stopper in mobiles, so you need to remove and install the component carefully, prevent from increasing the maintenance cost by damaging components. 12-12