12. FUEL SYSTEM LIKE 200i FUEL PUMP Fuel Pump Connector Connect the voltmeter (+) probe to the red/black wire and the voltmeter (-) probe to the green wire to measure the voltage from the ECU input to fuel pump unit. Standard : 8~16 V (Battery volt) To measure the resistance of the fuel pump to see if it is short circuit or not. T-MAP (Manifold Air Temperature LGS6 Pressure) Sensor Connect with the Fi diagnostic tool. Enter the Data Analyze item to check if the manifold pressure data is malfunction. (Turn on the ignition switch but engine is not starting) If the figure was incorrect, it means T-map sensor is problem. Standard : 101.3 3 kpa The ambient pressure drop about 12Kpa at the altitude every raised. 12-17