8. STARTER MOTOR/GENERATOR/LEFT CRANK- CASE COVER/STARTER CLUTCH/CAMSHAFT Pulsar CK 125 Groove LEFT CRANKCASE COVER INSTALLATION Install the left crankcase cover and tighten the eight bolts. (Refer to 8-2.) Torque: 0.81.2kg-m Install the reduction gear, shaft and washers. Bolts Shaft Reduction Gear O-ring Then install the reduction gear cover and tighten the three bolts. Torque: 0.81.2kg-m · Install the reduction gear shaft by aligning the shaft pin with the shaft seat groove. · Apply engine oil to the reduction gear cover O-ring before installation. Pin Washers Cover O-ring STARTER MOTOR INSTALLATION Apply engine oil to the starter motor O-ring and then install it. Install the starter motor. Install and tighten the two mounting bolts. Torque: 0.81.2kg-m Starter Motor Mounting Bolts 8-6