16. BRAKE SYSTEM UXV 500 Cap FRONT BRAKE FLUID CHANGE/AIR BLEED (OFF ROAD) BRAKE FLUID CHANGE Place the machine on the level ground and set the handlebar upright. Remove the two screws from the brake fluid reservoir cap. Use shop towels to cover plastic parts and coated surfaces to avoid damage caused by splash of brake fluid. Connect a transparent hose to the brake caliper bleed valve (right and calipers) and then loosen the bleed valve nuts. Use a syringe to draw the brake fluid out through the hose. Then, tighten the bleed valve nuts. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) Bleed Valve Nut Reservoir Fill the brake reservoir with brake fluid. 16-10