3. INSPECTION/ADJUSTMENT UXV 500 6. Install the oil filler cap and oil level check bolt. Torque: Oil filler cap: 1.5 kgf-m (15 N-m, 12 lbf-ft) Oil level check bolt: 2 kgf-m (20 N-m, 15 lbf-ft) Be sure no foreign material enters the crankcase. 7. Install the skid plate. FRONT DRIVE GEAR OIL Change the oil in the front drive gear case when specified by the Maintenance Schedule. Change the oil with the front drive gear case warm, and the UXV on level ground to assure complete and rapid draining. Front drive gear oil replacement 1. To drain the oil, first place an oil drain pan under the oil drain plug (1). 2. Remove the oil filler bolt (2). 3. Remove the drain plug. 4. After the oil has completely drained, reinstall and tighten the drain plug to the specified torque. Torque: 3.2 kgf-m (32 N-m, 23 lbf-ft) 5. Fill the gear case with the recommended oil. Recommended oil: SAE 80-90 (2) Oil quantity: Periodic oil change: 0.27 L 3-18