super 8 50 2t 1 Manuel atelier : Page 153

          13.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK                                                     SUPER8 50 2T

                                                     Top Steel Ball
 Apply grease to the top and bottom ball races
 and install 20 steel balls on the top ball race
 and 15 steel balls on the bottom ball race.




 Apply grease to the ball races and install the
 front fork.
 Apply grease to the top cone race and install
 it.
 Tighten the top cone race and then turn the
 steering stem right and left several times to
 make steel balls contact each other closely.

 Check that the steering stem rotates
   freely without vertical play.
                                                                 Top Cone Race
                                                        Top Cone Race Lock Nut Wrench
 Install the steering stem lock nut and tighten it
 while holding the top cone race.
 Torque: 7.08.0kg-m
 Install the front wheel. ( 12-15)




                                                              Steering Stem Lock Nut Wrench


 HANDLEBAR INSTALLATION
 Install the handlebar onto the steering stem
 tube and then install and tighten the bolt.
 Torque: 4.5kg-m
 Install the front wheel. ( 12-6)
 Install the brake levers. ( 12-15)
 Install the handlebar covers.




                                                                 Nut

13-17