14.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK LIKE 200i ASSEMBLY Clean all removed parts. Apply silicon grease to the pistons and oil seals. Lubricate the brake caliper cylinder inside wall with brake fluid. Install the brake caliper piston with grooved side facing out. Install the piston with its outer end protruding 35mm beyond the brake caliper cylinder. Fixed-Reed Wipe off excessive brake fluid with a clean shop towel. Apply silicon grease to the brake caliper seat pin and caliper inside. Install the brake caliper seat. Brake Pads INSTALLATION Install the brake caliper and tighten the two bolts. Torque: 2.93.5kg-m Connect the brake fluid tube to the brake caliper and tighten the fluid tube bolt. Torque: 3.04.0kg-m Fill the brake reservoir with recommended brake fluid and bleed air from the brake system. Caliper Bolts FRONT SHOCK ABSORBER REMOVAL Remove the front cover. ( 12) Remove the front wheel. Remove the front shock absorber upper mount bolts. Loosen the lower mount bolts to remove the front shock absorbers. Mount Bolt 13