17. STARTING SYSTEM Pulsar CK 125 STARTER RELAY Starter Relay INSPECTION Remove the left side cover. Turn the ignition switch ON and the starter relay is normal if you hear a "click" when the starter button is depressed. If there is no click sound: · Inspect the starter relay voltage · Inspect the starter relay ground circuit · Check for continuity between the starter relay yellow/red and green/red wire Green/Red Yellow/Red terminals Connect a 12V battery across the starter relay yellow/red and green/red wire terminals. Connect an electric tester between the starter relay large terminals and check for continuity between the two terminals. The relay is normal if there is continuity. Replace the starter relay with a new one if there is no continuity. Starter Relay STARTER MOTOR INSTALLATION Apply engine oil to the starter motor O-ring and install the starter motor. Install and tighten the two mounting bolts. Torque: 0.81.2kg-m Install the starter motor cable lock nut and waterproof cover. O-ring 17-5