14. REAR CARRIER/REAR FENDER/ EXHAUST MUFFLER Pulsar CK 125 REAR CARRIER REMOVAL Remove the rear carrier lock nuts and bolts to remove the rear carrier. Lock Bolts INSTALLATION Install the rear carrier in the reverse order of removal. When installing, connect and route the taillight and turn signal light wires properly. Lock Bolts SEAT REMOVAL Remove the seat lock bolts. Remove the seat. INSTALLATION Install the seat in the reverse order of removal. REAR FENDER REMOVAL Rear Cover Remove the rear carrier and seat. Remove the rear right and left side covers. Disconnect the turn signal light, stop light and taillight wires. Remove the rear fender by pulling it backward. When installing plastic parts, do not pull them forcedly and do not damage the coating surfaces. INSTALLATION Rear Fender Install the rear fender in the reverse order of removal. 14-2