11. FRONT WHEEL/SUSPENSION/ STEERING Pulsar CK 125 Place shop towels under the bottom tube and 6mm Socket Spanner set it in a vise. Apply locking agent to the socket head bolt and then install it into the piston. Tighten the socket head bolt using the socket spanner. When tightening the socket head bolt, temporarily install the front fork spring and front fork tube. Torque: 1.52.5kg-m Fork Seal Driver Apply engine oil to a new oil seal and install the oil seal using the fork seal driver. Then, install the snap ring and dust seal. Fork Seal Driver Attachment Fully compress the front fork and fill SAE30# engine oil into the front fork tube. Specified Oil Level: 140mm Do not fill too much engine oil. Specified Capacity: 120cc Compress Install the front fork spring into the front Front Fork Bolt fork tube with the closely wound coils facing down. Install and tighten the front fork bolt. Torque: 1.53.0kg-m 11-13