10. CRANKCASE/CRANKSHAFT/KICK STARTER/TRANSMISSION K-PIPE 125 Kick Starter Spindle TRANSMISSION DISASSEMBLY Remove the plate and the kick starter spindle from the left crankcase. Main Shaft Countershaft Remove the transmission fork shaft and transmission forks. Remove the transmission drum. Remove the transmission main shaft and countershaft from the right crankcase. When removing, the transmission gears must be removed as a set. Transmission Drum Transmission Forks INSPECTION Inspect each gear for wear or damage and replace if necessary. Check the gear teeth and engagement dogs for wear or damage. Check the mainshaft and countershaft splines and sliding surfaces for wear or damage. Measure the I.D, of each spinning gear. Service limit: M2: 17.058mm M4: 17.074mm C1: 23.081mm C3: 20.081mm Measure the I.D. and O.D. of C1 bushing. Service limit: I.D.: 20.08mm O.D.: 22.75mm 10-7