10. CRANKCASE/CRANKSHAFT/KICK STARTER/TRANSMISSION K-PIPE 125 Turn the outer races of the crankshaft bearings with your fingers. The bearings should turn smoothly and quietly. Also check that the inner races of the bearings fit tightly on the crankshaft. Check the timing sprocket for wear or damage. Timing Sprocket Bearing Circlip KICK STARTER DISASSEMBLY Remove the thrust washer and pry out the circlip. Starter Ratchet Starter Pinion Circlip and Trust Washer Remove the circlip and thrnst washer. Remove the kick starter pinion. Kick Starter Spindle Circlips KICK STARTER ASSEMBLY Assemble the kick starter spindle in the reverse order of disassembly. INSTALLATION Install the crankshaft and kick starter to the left crankcase. Align the punch mark of the kick starter spindle with the punch mark on the Pinion Gear Starter Driven Ratchet Spring starter driven ratchet. 10-6