17. STARTING SYSTEM K-PIPE 125 Continuity Check for continuity from the cable terminal to the brush holder and from the cable terminal to the brush. Cable terminal and brush holder No continuity: normal Cable terminal and brush Continuity: normal No Continuity Inspect the brushes for wear or damage. Measure the brush length. Service limit: 8.5mm Inspect the brush springs for wear or fatigue. Brush Springs INSDTALLATION Install a new O-ring and apply oil to it. Install the starter motor and tighten the three mounting bolts securely. Install the ground terminal properly as shown with starter motor mounting bolt. Connect the starter motor connector. Install the starter clutch. Install the front cover. 17-4