4. LUBRICATION SYSTEM LIKE 200i
ENGINE OIL
OIL LEVEL
· Place the motorcycle upright on level
ground for engine oil level check.
· Run the engine for 23 minutes and
check the oil level after the engine is
stopped for 23 minutes.
Oil Dipstick
Remove the oil dipstick and check the oil
level with the oil dipstick.
If the level is near the lower level, fill to
the upper level with the specified engine
oil.
OIL CHANGE
The engine oil will drain more easily
while the engine is warm.
Remove the oil filter screen cap located Oil Filter Screen Cap
on the bottom of the engine to drain the
engine oil thoroughly.
After the oil has been completely
drained,check the filter screen O-ring for
damage and replace if necessary.
Install the oil filter screen, spring and filter
screen cap.
Torque: 1.5kg-m
Fill with the specified SAE10W40#, API:
SG/CD engine oil to the proper level.
Oil Capacity: At disassembly : 1.1 liter
At change : 0.9 liter
Check for oil leaks and then start the
engine and let it idle for few minutes.
Recheck the oil level.
3
4.7 / 5