agility 50 city 2t Manuel atelier : Page 158

          15. ELECTRICAL EQUIPMENT                                                    AGILITY CITY 50 2T




CDI UNIT INSPECTION
  Remove the front cover.
  Disconnect the CDI coupler and remove the
  CDI unit.




                                                           CDI Unit


  CDI CIRCUIT INSPECTION
  Measure the resistance between the                   Blue/ Yellow
  terminals.                                                            Black/Blue
  Replace the CDI unit if the readings are not
  within the specifications in the table below.
 · Due to the semiconductor in circuit, it is
       necessary to use a specified tester for
       accurate testing. Use of an improper
       tester in an improper range may give
       false readings.
     · Use a Sanwa Electric Tester or Kowa
       Electric Tester (TH-5H).
     · In this table, "Needle swings then
       returns" indicates that there is a charging
       current applied to a condenser. The needle                                          Violet/Red
       will then remain at "  " unless the           Violet/ Black          Black / Blue
       condenser is discharged.                                 Green

                                                                        Green/ Black
  Use the x K range for the Sanwa Tester.
  Use the x 100 range for the Kowa Tester.

                                  Unit: 
   Probe             Blue/              Black/
             Black            Green
  (-)Probe           Yellow             Yellow

   Black             4~7M 4~7M 2~3M

   Blue/
          15~20K              600~900   1000~1500K
   Yellow

   Green     15~20M 600~900             4~7M

   Black/
                                
   Yellow

                                                                                           15-10