11. FRONT WHEEL/SUSPENSION/ STEERING K-PIPE 125 6mm Socket Spanner Place shop towels under the bottom tube and set it in a vise. Apply locking agent to the socket head bolt and then install it into the piston. Tighten the socket head bolt using the socket spanner. When tightening the socket head bolt, temporarily install the front fork spring and front fork tube. Torque: 1.52.5kg-m Apply engine oil to a new oil seal and install the oil seal using the fork seal driver. Specified Oil Then, install the snap ring and dust seal. Level: 51.2mm Fully compress the front fork and fill SAE8# engine oil into the front fork tube. Do not fill too much engine oil. Compress Specified Capacity: 90cc Install the damping spring to the damper and Damper Nut then install them into the front shock absorber tube. Install the front shock absorber spring and tighten the damper mut. Torque: 1.53.0kg-m Install the front shock absorber spring with the loosely wound coils facing up 11-15